In nearly all situations, most individuals spend quite a bit of money purchasing their lift truck. Hence, it is very essential to take good care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures that are carried out in the maintenance and care of this piece of machine.
One of the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it runs. For instance, if there are any knocks or misses, the machinery is faulty and this should raise some concerns. Moreover listen carefully for any squealing sounds that come from the belts since these sounds would provide you with a lot of information.
When performing maintenance, several of the main components you would need to pay attention to include the horn, safety warning devices, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also essential to inspect the wiring.
After the above components have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each battery cell needs to be inspected so as to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The fuel filters, hydraulic filter and the transmission filter must be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle needs to be performed. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Afterwards, check every other component of the machinery including the wheels. If any type of fault or concern is detected, be certain to deal with it immediately so as to make sure the equipment is running at its safest and optimum levels.